146
ATLANTA Xtrend - ET9000
Kullanım Kılavuzu
Network Setup
[ : Press
‘Setup’
‘System’
‘Network’]
Atlanta Xtrend-ET9000 is integrated with standard 10/100Mbps Ethernet with RJ 45 connector standard. You are
recommended to use this network capability of Atlanta Xtrend-ET9000 to fully enjoy the system. You can setup the
network settings through this
Network Configuration
menu.
In the
Network Configuration
menu, you will see five sub menus as follows:
Adapter settings
Through this menu, you can set the basic Ethernet configuration.
●
User Interface
YES
is used to activate the Ethernet. If you set this option at
NO
, the Ethernet will not work.
●
Use DHCP
YES
is used to use
DHCP (Dynamic Host Configuration Protocol)
. If you set this option at
YES
, it will automatically
detect the correct IP address.
NO
is used when you want to use a certain fixed IP address. In this case, you need to
enter correct addresses in each field.