Atlanta ATH-3146, Инструкция по эксплуатации

Страница: 6 / 24

6
INSTRUCTION MANUAL
4. Press and hold the switch on first speed selection button or you can press on
the second speed selection button as well to get maximum power. If you need less
power then turn the speed control to the left or turn to the right to add. Do not allow
the blender to be overheated, take breaks.
5. During the operation the blender blade should be smoothly directed to get an
indiscrete mass. Use the pulse mode by pressing the start button for a short time.
The continuous operation time should be not more than two minutes or one minute
at maximum power, after that the blender needs a “rest” for about five minutes.
6. Upon completion of the operation, wait until the motor completely stops,
disconnect the device from the electric mains, wait until the motor stop, take off the
blender nozzle and only after that lift the blade from the food.
NOTES
1. Do not insert the blender blade deeper than half the length of the shaft. Do
not remove the blender from mixing or blending products until it completely stops.
Always check the quantity of the ready-made product do not exceed the maximum
mark.
2. Prevent the motor from overheating; while loading viscous and thick products
take more breaks.
3. The metal blender nozzle may also operate with hot products up to 50° С. Other
nozzles and bowls are not intended for hot products.
4. The blender should be used only with components included in the set.
5. Ice, coffee and other very hard products may be ground in any hard bowls: the
bowls included in the set are not intended for such purpose.
6. The manufacturer reserves the right to make any additional changes in the
blender construction.