Atlanta ATH-3122, Инструкция по эксплуатации

Страница: 6 / 20

6
INSTRUCTION MANUAL
7. Continuous work time should not exceed 5 minutes. Following that, the mixer
needs a “rest” for about three minutes.
8. After finishing the operation, set the mixer switch “B” to the “0”, and then unplug
the mixer.
9. Click on the special button “C” to remove the nozzles.
NOTES
1. The mixer is designed for mixing of the liquids; do not use it for mixing of solid
components and very viscid dough.
2. The mixer should operate with the alternation of working cycles and rest, on
average for 5 minutes, to avoid the engine overheating.
3. The continuous work time depends very heavily on the viscosity of the mixing
liquid.
4. Do not immerse the nozzles deeper than the working surface; do not remove
the nozzles from the liquid if the mixer is not switched off, wait for the mixer to stop
completely.
5. The mixer should be used only with the components, supplied in the kit.
6. Manufacturer reserves the right to make slight modification in the mixer design
without further declaration.
CLEANING AND CARE
• Mixer should be cleaned after each use.
• Disconnect the device from the power supply.
• Clean all nozzles in warm soapy water and rinse in clean water. Wipe the main
block with the soft wet cloth.
• Do not use chemically reactive or abrasive detergent agents for mixer cleaning,
as it can damage its surface.
• Do not clean the mixer with the tools.
• Don`t ever immerse the device in water or other liquid.
ENVIRONMENTAL PROTECTION
The old devices are the package of the technical materials; therefore
they can not be recovered with the domestic waste! On that reason,
please, support us in the resources saving and environmental
protection and return the unit to the recycling center (if applicable).