User`s Manual
Page 8 of 18
2.3 Satellite Finding
1. Press the [MENU] to display main menu.
2. Press [OK] on <Finding> option to enter satellite finding menu.
z
Satellite:
Show and choose the satellite. Press [
◄
/
►
] to select satellite, or press [OK] to enter Satellite list.
z
LNB Type:
Set LNB Type, press [
◄
/
►
] button to switch. Default set to UNIVERSAL.
z
LO.LOW:
Show the low local oscillator value. Use digital button to input the LO.LOW once the LNB Type is customized.
z
LO.HIGH:
Show the high local oscillator value. Use digital button to input the LO.HIGH once the LNB Type is customized.
z
Frequency:
Input the frequency by 0~9 keys directly.
z
Symb.rate:
Input the symbol rate by 0~9 keys directly.
z
Polarity:
Press [
◄
/
►
] button to select between vertical and horizontal.
When signal locked, the signal power level, C/N, FEC, BER (after BER) will be shown, at the same time the speaker will
notify.
Adjust the dish slightly to get the strongest signal.
z
Search:
Press [OK] to scan channels.
3. Press [F1] to add new transponder to satellite
4. Press [SAT] to save LNB or save testing results
5. Press [F3] to enter Zoom menu to only show strength and quality of the inputting signal
