User`s Manual
Page 6 of 18
z
Switch Type
:
Set DiSEqC type. Press [
◄
/
►
] button to switch between None/DiSEqC1.0/ DiSEqC1.1. Default set to None.
z
Switch Input
: Set DiSEqC 1.0 or DiSEqC 1.1’s input port. Default set to None.
5. Press [F3] to switch between Horizontal and Vertical polarity.
7. Press [SATo pause current status.
8. Press [
▲
/
▼
] to move vertical coordinate’s position, and browse the level of Hi-Lo lines.
9. Press [
◄
/
►
] to move Red cursor to select frequency.
10. Press [OK] when a frequency of Abscissa is selected, system will enter Frequency searching menu, press [OK] when Search selected
to start frequency searching.
2.2 Constellation Analyzer
1. Press the [MENU] to display main menu.
2. Press [OK] on <Constellation> option to enter constellation analyzer menu.
