Atlanta 1335MD, Техническое руководство и перечень запасных частей

Страница: 104 / 174

Manual & Parts Lists Technical
97
time you step on the treadle it will go through
this cycle until it is complete and then it will
return to the home position)
f) Push the reset button one-time and the ruffle
blade will return upward to the home position.
g) Switch the manual/automatic button to
automatic position for normal operation.
Thumbwheels
Instructions for adjusting ruffle depth:
This adjustment is located on the top of ruffler
assembly and is controlled by turning the knob
inward or outward, noting where the indicator
arrow is pointing.
( The higher the number
the greater the depth of the ruffle.)
The object of this setting is to ruffle/fold-up or
use-up material within the corner as needed for
the width of sewing margin or distance from
the right edge of material to the needle.
This is same concept as the amount of material
you would need to remove when physically
mitering a corner for a bed. Such as; if you
cut-out or remove 3 inches of material, you
need to ruffle in 3 inches of material.
Example: a setting of 3 ruffles, with a depth
of ½ inch or a setting of 6 ruffles with a depth
of ¼ inch… etc..