Atlanta Attachment Company 3200PC, Техническое руководство и перечень запасных частей

Страница: 17 / 72

Technical Manual & Parts Lists
12
Touch Screen Operation
The graphic images presented on the touch screen
show “3-dimensional” buttons, which may be pressed to
access other screens, change counters and timers, or
actuate hardware. Areas lacking the “3 dimensional”
border contain information only. Counters are identified
with the “+” and “-” buttons in the corners. These
counters may be adjusted by pressing the “+” and “-”
boxes. Pressing Reset from any screen clears all machine
functions and returns to the main Ready page. Normal
operation of the machine is controlled from the main
Ready menu. From here you can start the Auto Cycle.
The main Ready menu allows anyone to access the
necessary functions and adjustments needed for normal
operation of the machine.
Light Tower Function
The purpose of the light tower is to indicate the current status of the machine at some distance
away from the machine. This makes it easy to see machine status at a glance. Definitions for the
different light states currently available on the 3200PB are included below.
Light Status Definition
Green Steady Normal, machine producing borders
Green Flashing Machine producing borders but will stop soon for bobbin change.
Yellow Steady Normal, machine powered but idling between borders.
Yellow Flashing
Machine stopped in middle of order and needs operator activity before
continuing.
Red Not currently utilized. Available for future use.
Calibrating Default Border Lengths
When installing the Model 3200PB border machine, it is necessary to first obtain new default
border lengths for all mattress sizes. To obtain these lengths determine which border-making table will
be used to check the borders coming off of the 3200PB machine. Using this table, a measurement of
every border size needs to be made by wrapping a measuring tape around the arm and measuring to the
cut mark for each border size.
After all of the default border lengths have been recorded, they must be stored in the controller of
the 3200PB1 machine. To store the default border lengths in the 3200PB controller press Edit New
Order and then Customize Style . Change the default border lengths to match the values measured on
the border table. NOTE: length of borders is displayed in tenths of inches. For example: king size value
of 3040 is equivalent to 304.0 inches