Atlanta Attachment Company 3200PC, Техническое руководство и перечень запасных частей

Страница: 20 / 72

Technical Manual & Parts Lists
15
Advanced:
Setup: Pressing this button gives access to 4 screens of adjustments that can be
made. When a button on one of the screens is pressed, it will give an explanation of what the adjustment
is and allow the adjustment to be made.
Manual:
Pressing this button will allow the user to manually activate individual functions of the
unit.
Contrast: Pressing the “+” and “-” will raise and lower the contrast of the screen for better
visibility.
Border Splicing Method
When the machine runs out of border material, it stops
and automatically back feeds about 10 inches to make the
border splicing easier. The screen displays an “Out of Border
Material” message. Load the next border roll on the pin, and
staple its leading edge to the trailing edge of the border
currently in the machine.
Also, to make the operation of the 3200 machine more
efficient, the border splicing on the Serging Station must be
performed correctly.
Machine Adjustments
The following adjustments will have already been made before the unit is shipped from the
factory.
 Adjust the spring screw on the guillotine to make sure the blade cuts the material.
 Adjust the roller down cylinder so that the rollers touch with little or no pressure.

Adjust the cylinders on the prefeed rollers the same.
 Adjust the counter balance springs on the prefeed seam detector rollers to counter balance 70%
of the weight.
 Step motor speed
Slow 135 RPM Slow 28 RPM
Fast 163 RPM Fast 151 RPM
Prefeed Feed