Atlanta Attachment Company 1335AY Скачать руководство пользователя | Manualshive

Страница: 24 / 116

background image

Technical Manual & Parts Lists

17

before the thread detector becomes active. This time is
in 1/100ths seconds. If this time is too short, false
thread breaks will occur at start-up.

13. Finger Clamp Up Delay:

The time from the Finger

Clamp solenoid turning off until the Clamps Up
solenoid turns off. This allows time for the Finger
Clamp to get out from under the folder before it and the
clamps rise. This time is in 1/100ths seconds.

14. Sew Head Jam Detect Delay:

The time from the

start of sewing until the Sew Jam Det. Eye should be
covered. If the eye is not covered in this time a jam
error will occur. This time is in
1/10ths seconds.

15. Cut Cycle Enable:

Set this counter to "0" to turn off the gusset knife. This setting is mainly used

for testing purposes. Normally set to "1". This does the same thing as the Cut Cycle On/Off button on
the MANUAL page.

16. Extra Ruffle Stitches:

This sets extra stitches sewn into the ruffle while the ruffling blade is still in

under the presser foot. This should be set to "0" for thin gussets and "1" for thick gussets. It should never
be set higher than "1".

17. Accumulator Jam Time:

The time allowed for the accumulator rollers to move to the bottom of

their stroke. If the rollers do not reach the down sensor in this amount of time an error will occur. This
time is in 1/10ths seconds.

18. End Sew Gap:

The number of stitches used by the control to stop the sewing if the gusset End

Detector Sensor misses the end of the gusset on the last side of the panel. Acts as a safety device to keep
the machine from "running away". If this counter is set to "0" the safety feature is disabled.

19. Stop for Splice Enable:

This turns on the special splicing function. When this is enabled and the

proper STYLE is recalled for the correct size panel, the machine will stop at the proper position to make
a roll change splice in front of the Preflanger that will result in the minimum waste of gusset material.

20. Preflanger Stop Delay:

Sets the minimum run time of the Preflanger motor when the loop eye

uncovers. The higher this number the less often the Preflanger will cycle on and off.

21. Preflanger Enable:

The Preflanger Enable button is used to turn on or off the preflanger module for

maintenance.

22. Puller to Preflange Distance:

The measured distance from the front of the Preflanger guide to the

Ruffler puller roller. This distance is a constant and is used by the computer to calculate the stopping
position for splices.

23. Stitches Offset Distance:

The distance in tenths of stitches from the last stitch sewn straight (the

beginning of the corner rotate) to the edge of the panel. This distance varies with the stitch margin on the

panel and is part of the style for that size panel. It is
used by the computer to calculate the stopping position
for splices.

24. Stitches Per Inch:

This setting tells the computer

the actual stitch length being sewn and is used to make
calculations for the roll splicing feature.

25. Thd Pull Off Time:

The on time of the Thread

Pull-off solenoid is 1/100 ths seconds. Adjust so that
the Thread Pull-off cylinders make a full stroke.

From

the

library

of:

Diamond

Needle

Corp

«
...
22
23
24
25
26
...
»

Содержание 1335AY





















































































































Отзывы:

Нет отзывов

Похожие инструкции для 1335AY

Бренд: Gamma Страницы: 18

Бренд: GBC Страницы: 4

Бренд: JK Audio Страницы: 16

Бренд: Nobles Страницы: 1

Бренд: Carina Страницы: 30

Бренд: IPC Eagle Страницы: 40

Бренд: Baby Lock Страницы: 69

Denim Pro BL 18

Бренд: Baby Lock Страницы: 22

KENMORE 385. 1254180

Бренд: Kenmore Страницы: 56

Sewing machine cabinet 272.98100.490

Бренд: Kenmore Страницы: 13

SEARS 385. 17622

Бренд: Kenmore Страницы: 52

Kenmore 385.19106

Бренд: Kenmore Страницы: 71

Бренд: Kenmore Страницы: 36

Бренд: Kenmore Страницы: 44

Бренд: Kenmore Страницы: 60

Бренд: Kenmore Страницы: 32

OVERLOCK 385. 564180

Бренд: Kenmore Страницы: 46

Kenmore 385.17626

Бренд: Kenmore Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды