ATL IB2S-A Скачать руководство пользователя

Страница: 25 / 46

MUTE: a mute/un-mute command will be sent to all channels. The display

backlight will flash once per second when muted.

Clip

Nothing.

Trigger

ON mode: system shuts down and display shows standby mode (see 1.2)

Off mode: nothing.

3.1.2 Analogue Input Sensitivity Menu

The analogue input sensitivity menu is shown when the SELECT button is pressed in the setup menu

with analogue input sensitivity menu as active sub-menu. The current value appears (in this example

+4.00dB). There are no sub-menus.

Actions

Rotary

UP/DOWN: change the analogue input sensitivity in steps of 0.25dB, with

a minimum value of +4dB and a maximum of +20dB.

Buttons

MENU: nothing.

BACK: the setup menu appears (see 3.1).

PRESET: If pressed briefly the current preset is displayed for two seconds. If

held for more than two seconds the preset menu appears (see 4).

SELECT: saves value and sends to all channels. Setup menu appears (see 3.1).

MUTE: a mute/un-mute command is sent to all channels. The display

backlight flashes once per second when muted.

Clip

Nothing.

Trigger

ON mode: system shuts down and display shows standby mode (see 1.2).

OFF mode: nothing

3.1.3 12V Trigger Mode Menu

The 12V trigger mode menu is shown when the SELECT button is pressed in the setup menu with 12V trig-

ger mode menu as active sub-menu. The current setting appears (this example shows the ON mode).

Sub-menu:

ON or OFF

Actions

Rotary

UP/DOWN: scrolls up/down through the sub-menu list.

Buttons

MENU: nothing.

BACK: the setup menu appears (see 3.1) .

PRESET: If pressed briefly the current preset is displayed for two seconds.

If held for more than two seconds the preset menu appears (see 4).

SELECT: saves setting and sends to all channels. The setup menu appears

(see 3.1). Note: Trigger must be attached to first channel.

MUTE: a mute/un-mute command is sent to all channels. The display

backlight flashed once per second when muted.

Clip

Nothing.

Trigger

ON mode: system shuts down and standby mode displayed (see 1.2).

OFF mode: nothing.

3.1.4 Channel Settings Menu

The Channel Settings menu is shown when the SELECT button is pressed in the setup menu with Channel

Settings menu as active sub-menu, or when the back button is pressed in main source menu, main trim

menu, LFE source, or LFE trim menu. The selected channel in the setup menu and selected alias appears

(in this example 1, Left Master). Which Channel Settings sub-menu option appears depends on the last

shown channel settings sub-menu option (in this example Main Source).

Содержание IB2S-A















































Результаты поиска

Содержание IB2S-A

Отзывы:

Похожие инструкции для IB2S-A

Бренды по названию

Популярные бренды

ATL IB2S-A, Руководство пользователя

Результаты поиска

Содержание IB2S-A

Отзывы:

Похожие инструкции для IB2S-A

Бренды по названию

Популярные бренды