pAIRING MODE
While the telephone is in the “On-Hook”
mode, press and hold the [pAIRING] key
for 3 seconds to enter pairing mode, the
telephone will start to search for
Bluetooth
®
Headsets for 3 minutes, the LCD will show
pAIRING HEADSET, if there is a
Bluetooth
®
Headset within range and in pairing mode,
the telephone will discover it and display
it’s brand name on the LCD. The LCD will
now prompt you to enter the pIN Code for
the pairing process, the Default pIN Code is
0000, you can enter the correct pIN Code
and press [PAIRING] button to confirm or if
you don’t enter a pIN Code the request for
the code will timeout after 3 seconds. The
pairing procedure will be successful when
the
Bluetooth
®
Headset has the same pIN
code and the telephone will show HEADSET
pAIRED, otherwise the telephone will show
pAIRING FAILED when the pair mode has
timed out.
If you plan to pair a second
Bluetooth
®
Headset, repeat this procedure.
Note: If an attempt is made to Pair an addi-
tional
Bluetooth
®
Headset, when two Head-
sets have been previously Paired, the LCD
will display PAIR LIST FULL, you must Clear
Paired Headsets before attempting to Pair a
new Headset.
EXIT pAIRING MODE
While the telephone is in the “On-Hook”
mode, press and hold the [pAIRING] key for
over 3 seconds to enter the pairing Mode,
and then press [pAIRING] key again this
will cause the telephone to exit the pairing
Mode, and the telephone will show CANCEL
pAIRING.
CLEAR pAIRED HEADSETS
While the telephone is in the “On-Hook”
mode, press and hold the [pAIRING] key
over 3 seconds to enter pairing Mode,
and then press and hold [pAIRING] key for
over 3 seconds before the clearing pairing
procedure is successful, this operation
will clear the paired Headset List, and the
telephone will show pAIRING CLEARED.
CLEAR pAIRED HEADSETS
INDIvIDUALLY
While the telephone is in the “On-Hook” mode,
press and hold either the [1st HEADSET] or
[2nd HEADSET] for over 5 seconds, this
will delete this headset from paired list, the
telephone will show HEADSET REMOvED
and then NO HEADSET.
MULTIpLE HEADSETS FUNCTION:
The ATL Berkshire 600 AG can support up to
two headsets, this means that the user can
pair up to a maximum of two headsets and
the ATL Berkshire 600 AG will detect and
attempt to make a connection with one of
the paired Headsets when the user selects
a working headset.
AUTO HEADSET DETECTION:
The telephone can detect the paired Headset
status and prompt its status on the LCD
automatically, when the telephone is in the
“On-Hook” mode, the
Bluetooth
®
Headset
connecting status is show as
BLUETOOTH
®
MODE or CONNECTING.
vIEWING pAIRED HEADSETS:
While the telephone is in the “On-Hook”
mode it’s possible to view which
Bluetooth
®
Headsets are paired with the ATL Berkshire
600 AG by simply pressing the [vOLUME-]
key which will list the [1st HEADSET] or by
pressing [] key which will list the
handset. Default = 1s.
TBR TIME ADJUSTMENT
Transfer break times may be adjusted from
100~600ms. in increments of 100ms. First
confirm that the 2 position switch, identified
as RECALL on the rear of the phone, is set
to the ‘T’ position. Lift the handset, press
SET, TRANSFER, followed by a numeric
key (1~6), replace the handset. Default =
100ms.
pROGRAMMING pORT
The Berkshire 600 AG has an unidentified
port, alongside the other configuration
switches, at the rear of the telephone.
programming of this port is limited to
technicians trained in its use.
Help
If the telephone appears to be faulty when
first connected, a few simple checks may
help to identify some possible problems, as
listed below:
NO DIAL TONE
Check that the telephone plug is fully
inserted in the socket
If it is, try connecting the telephone
into another socket, if available. If
dial tone is now heard, the original
socket is faulty.
Alternatively, try connecting another
telephone into your socket. If this
telephone gives dial tone, then your
new telephone is probably faulty.
►
►
►
TRANSFER/RECALL KEY NOT WORKING
Change the recall selector switch
setting (T/E). If the transfer operation
is now satisfactory, the problem is
resolved.
Compliance Notes
The Berkshire 600 AG may be connected to
the following types of installation:
Direct Exchange Lines (DEL)
Compatible
private
Automatic
Branch
Exchanges (pABX). please contact
the supplier of your Berkshire 600
AG to confirm compatibility with your
pABX.
Whilst the Berkshire 600 AG is compliant as
an extension to a compatible pABX system,
it cannot be guaranteed to operate under all
possible conditions of connection. Any case
of difficulty should be referred in the first
instance to the supplier of your telephone.
Power Rating
Information – AC
Plug Top Adapter
Input 230v ~ 50 Hz, 50mA
Output 7.5v ~ 50Hz, 300mA
ATL recommends only using the approved
adapter supplied with this product (ATL part
Number 5/500/100/064)
►
1.
2.
