Safety Statement
The plug Top power Supply included with
your ATL Berkshire 600 AG serves as the
disconnection device; therefore a socket
outlet shall be installed near the equipment,
and shall be easily accessible. Disconnect
the line cord before attempting to remove
the plug top power supply input jack from
the telephone.
Guarantee
Your Berkshire 600 AG telephone is designed
and manufactured to exacting quality
standards. This enables ATL Telecom Limited
to offer a 2 year guarantee from the date of
purchase. This guarantee protects against
faulty material or workmanship, applies to
the UK only and is not transferable.
The terms and conditions under which
the guarantee will be valid are as set out
overleaf.
Misuse or any modification carried
out to the telephone, or operation
other than in accordance with the
instructions supplied, will invalidate
the guarantee.
Damage arising from incorrect
installation, accidental damage or
consequential loss, are not covered
under the guarantee.
In the event of a fault developing
during the period of the guarantee,
the complete telephone should be
returned to your supplier, adequately
and safely packed, together with
proof of date of purchase.
The liability of ATL Telecom Limited
1.
2.
3.
4.
will be limited to the cost of repair or
complete replacement of the same
defective instrument, at the discretion
of the company. In the event that the
same item is not available, a suitable
alternate will be offered.
The terms of this guarantee do not
affect your statutory rights.
The
Bluetooth
®
word
mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by ATL Telecom is under
licence. Other trademarks and trade names
are those of their respective owners.
ATL BERKSHIRE 600 AG
BLUETOOTH
®
Core Specification
v1.2
BLUETOOTH
®
Range up to 10
metres
5.
ADJUSTING YOUR RINGER-vOLUME
The ringer volume is controlled by a 3 position
switch located at the rear of the telephone,
and indicated by the word ‘ringer’. Moving
through the settings from left to right they
are HIGH, MED and LOW.
ADJUSTING YOUR RINGER pITCH
The ringer pitch control is also a 3 position
switch located at the rear of the telephone,
and indicated by the words ‘RINGER
pITCH’. Settings from left to right are HIGH,
MED and LOW.
MAKING A CALL vIA THE HANDSET
pick up the handset and listen for
dial tone
Dial the required telephone number
(Note: making external calls from a
company exchange (PABX) requires
the number to be prefixed by an access
digit, notmally ‘9’)
Using your
Berkshire 600 AG
with Handsfree
Whether it’s having both hands available,
or conference calling with colleagues, the
speakerphone feature of the Berkshire
600 AG is seen by many as a valuable
benefit. Operation is via the HANDSFREE
key, (providing the handset is left in place).
Speaker volume may be adjusted via the [+]
and [-] keys.
►
►
Using your
Berkshire 600 AG
with a
Bluetooth
®
Headset
BLUETOOTH
®
FUNCTION
The ATL Berkshire 600 AG can allow a
maximum of two
Bluetooth
®
headsets to be
paired at any one time and will maintain a
connection to the activated device providing
it’s available, i.e. switched on and within
service range. Once you select a paired
headset as the working headset, and the
headset is turned on, the telephone can
detect the headset status automatically,
this means that if the headset is turned off,
running out of battery or out of service range
the telephone can detect there’s no headset
available. The telephone will attempt to
reconnect to this headset providing the
user hasn’t selected an alternative headset,
the telephone can detect the headset as
available immediately when its switched on,
or an out of range headset is back within the
telephone service area.
With the ATL Berkshire 600 AG in the “On-
Hook” mode, the [MUTE] key is defined as
the [pAIRING] key, which can activate the
pairing mode, cancel the pairing mode or
clear the paired list.
When the ATL Berkshire 600 AG is in the “On-
Hook” mode, the [VOLUME-] key is defined
as [1st HEADSET] key and [] key
acts as the [2nd HEADSET] key, you can use
these two buttons to select which headset
should be used as the active headset.
