15
ATIM_ACW-TM2D-HP_UG_EN_V1.2
b.
Configuring the LoRaWAN network pairing mode:
Applies only to ACW/LW8-TM2D-HP.
On LoRaWAN networks, there are two pairing methods by which a module can connect to the network.
OTAA (Over The Air Activation):
In this mode, the communication keys are assigned and transmitted over the network every time the module starts
up or requests a connection. This is the mode that is configured by default.
ABP (Activation By Personalization):
In this mode, the communication keys used are the ones loaded on the module at the factory. Every time the
module starts up, these same keys are used.
When you connect the ACW/LW8-TM2D-HP via
USB, the ACW configuration tool automatically detects the module’s
factory settings and displays them in the following window:
The default factory setting uses the OTAA mode.
Select LoRaWAN
network pairing
method
