8
ATIM_ACW-TM1D-HP_UG_EN_V1.2
b.
Opening the ACW housing
The housing must be opened to access both the terminal block and the mini-USB
port used to configure the module.
To do this, insert a screwdriver into the slot and tilt it downward to lift the inside
tab (see photo). Then pull on the back panel to separate the two parts of the
housing.
c.
Mounting to a support
ACW modems can be mounted on a flat wall, a tube or pole or a DIN rail, depending on the type of installation you
require.
These three types of support frames attach to the rear of the housing.
Mounting on a flat wall (provided):
Mounting on flat wall (provided):
Installation on a tube:
Mounting on a DIN rail:
Opening slot
