11
ATIM_ACW-TMxP_UG_EN_V1.0
f.
Wiring of the probes
3 wires probe
2 wires probe
Warning
: If 2-wire probes are used, two jumpers should be placed on J1 and J2 (above the 8-pin connector). Without
this, the data reported by the product will be inconsistent.
Probe 2
–
A
bis
Probe 2 - A Probe 2 - B
GND
IN
Probe 1
–
A
bis
Probe 1 - A
Probe 1
–
B
Probe 2 - A Probe 2 - B
GND
IN
Probe 1 - A
Probe 1 - B
T°
T°
T°
T°
