12
Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the blade unit.
Injury by the shredded material spinning away near the
hopper.
Risk from electricity, by using non-standard electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken, non-
obvious residual risks can still exist.
S
S
a
a
f
f
e
e
w
w
o
o
r
r
k
k
i
i
n
n
g
g
Before commissioning this product, read and keep to
the following advice. Also observe the preventive
regulations of your professional association and the safety
provisions applicable in the respective country, in order to
protect yourself and others from possible injury.
L
Pass the safety instructions on to all persons who work
with the machine.
L
Keep these safety instructions in a safe place.
L
Machine including safety cut-out
The safety cut-out, including an automatic motor brake,
which is attached to the shredder is used for the safety
of the machine, preventing the motor being started
when the machine is open and the rotating knives could
be reached by the operator’s hand.
Repairs on the safety cut-out must be done by the
producer or by a company designated by the
producer.
Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see 'Normal
intended use' and 'Working with the garden shredder').
Ensure that you have stand in a
secure standing position
and maintain your
balance
at all times. Do not lean forward
over the machine. When placing material into the shredder,
always
stand on the same level
as the machine.
Be
attentive
. Be careful what you do. Behave
sensibly
when working. Do
not
use the saw if you are
tired
.
Wear protective goggles, gloves and noise protection
while
working
with the machine.
Wear suitable
work clothes
!
−
Do not wear loose-fitting clothes
−
Slip-proof
shoes
Within his area of work
the operator
is responsible for third
parties.
The machine must not be operated by
children or young
people under 16 years of age
.
Keep
children
away form machine.
Never operate the machine if
other persons are in the
immediate vicinity
.
Never
leave the saw
unattended.
Keep your
workplace in an orderly condition
! Untidiness
can result in accidents.
Choose a
working
position
alongside the equipment or
behind it. Never stand near the ejection opening.
Never
reach into the filling or ejection opening.
Keep your face and body away from the filling opening.
Do not overload the machine! You work better and safer in
the
given performance range.
Only operate the machine with complete and correctly
attached
safety equipment
and do not alter anything on the
machine that could impair the safety.
Do not alter the
revolution speed
of the motor, since this
controls the safe maximum operating speed, and protects the
motor and all rotating parts against damage due to excess
speed.
Do
not
operate
without the funnel
.
Faulty
or
damaged parts
in the device must be replaced
immediately.
Close machine properly before enabling motor.
Do
not spray machine with water
(this is hazardous due to live components).
Do
not
leave the machine
standing in the rain
or use when
raining.
Store the
unused machine
in a dry locked place away from
the reach of children.
To prevent danger of injury to fingers during assembly or
cleaning operations hold the cutting mechanism (see. pic. p.
14) and wear protecting gloves.
Switch the machine off and
remove the mains plug from
the socket
when
−
carrying out repair works
−
carrying out servicing and repair
works, removal of faults
−
changing the blades
−
Transporting
−
leaving unattended (even during short interruptions)
Check the machine for possible damage
−
Before continuing to use the machine, the
protective
devices
must be inspected to ensure that they work
perfectly and with their intended function
−
Check whether the parts are damaged. All parts must be
correctly installed and fulfil all conditions to ensure
perfect operation of the saw
−
Damaged guards
and parts must be properly repaired or
exchanged by a recognized, specialist workshop; insofar
as nothing else is stated in the instructions for use.
−
Damaged or illegible
safety warning labels
should be
replaced
immediately.
Electrical safety
Design of the
connection cable
according to IEC 60245
(H 07 RN-F) with a core cross-profile section of at least
−
1.5 mm
2
for cable lengths
up to
25m
−
2.5 mm
2
for cable lengths
over
25m
When laying the
connecting attachments
, be sure that they
do get crushed or bent, and that the plug-and-socket
connection does not get wet.
Do not use the
cable
for purposes for which it is not meant.
Protect
the cable against
heat, oil and sharp edges
. Do not
use the cable to pull the plug from the socket.
Regularly check the
extension cables
and replace them if
they are damaged.
Do
not use any defective connection cables.
When working outdoors, only use extension cables
especially
approved
and appropriately labelled for outdoor
use.
