ATI Technologies THRASHER LZ170-3A, Руководство пользователя

Страница: 26 / 79

6- 3
Engine break-in
TIP
●
For ATVs equipped with an odometer or an hour meter,
follow the figures given in km (mi) or the figures given
in hours.
●
For ATVs not equipped with an odometer or hour meter,
follow the figures given in hours.There is never a more
important period in the life of your engine than the first
320 km (200 mi) or 20 hours of riding. For this reason,
you should read the following material carefully.
Since the engine is brand new, do not put an excessive load
on it for the first 320 km (200 mi) or 20 hours. The various
parts in the engine wear and polish themselves to the
correct operating clearances. During this period,
prolonged full-throttle operation or any condition that might
result in engine overheating must be avoided.
0-160 km (0-100 mi) or 0-10 hours
Avoid prolonged operation above 1/2 throttle. Vary the speed
of the ATV regularly. Do not operate it at one set throttle
position.
160-320 km (100-200 mi) or 10-20 hours
Avoid prolonged operation above 3/4 throttle. Rev the
engine through the gears freely, but do not use full
throttle at any time.
320 km (200 mi) or 20 hours and beyond
The ATV can now be operated normally.
NOTICE
If any engine trouble should occur during the engine
break-in period, immediately have a dealer check the ATV.
Parking on a slope
WARNING
Avoid parking on hills or other inclines. Parking on a hill
or other incline could cause the ATV to roll out of control,
increasing the chance of an accident. If you must park on
an incline, place the ATV transversely across the incline,
shift into first gear, stop the engine, and then block the
front and rear wheels with rocks or other objects.
Never park the ATV on hills thar are too steep to walk up
easily.
1. Bring the ATV to a stop by applying the front brake, shift into
first gear, and then stop the engine.
2. Releasing the front and rear brakes.
3. Turn the fuel cock to
“OFF”.