ATI Technologies THRASHER LZ170-3A, Руководство пользователя

Страница: 21 / 79

5-
3
FUEL
Make sure that there is sufficient fuel in the tank.
Engine oil
Make sure that the engine oil is at the specified level.
add oil as necessary.
Front and rear brakes
Brake lever
●
Check that there is no free play in the brake lever.
If there is free play, have a dealer check the brake
system.
●
Check the operation of the lever. They should
move smoothly and there should be a firm feeling when
the brakes are applied. If not, have a dealer check the
brake system.
Brake fluid level
Check the brake fluid level. Add fluid if necessary.
Brake fluid leakage
Check to see if any brake fluid is leaking out of the
pipe joints or brake fluid reservoirs. Apply the brakes
firmly for one minute. If there is any leakage, have
a dealer check the brake system.
Brake operation
Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brake pads for wear.
Throttle lever
Check the operation of the throttle lever. It must
open smoothly and spring back to idle position
when released. Have a dealer correct if necessary.
Drive chain
Check the condition of the drive chain and check
the drive chain slack. Lubricate and adjust the
drive chain as necessary.
Tires
Check tire pressure tire gauge to check and adjust tire
pressure when the tires are cold. Tire pressures must
be equal on both sides.
WARNING! Operation of this vehicle with improper
tire pressure may cause severe injury or death from loss of
control or rollover. Tire pressure below the minimum
specified could also cause the tire to dislodge from the rim
under severe riding conditions.