ATI Technologies ALL-IN-WONDER PRO, Установка и настройка

Страница: 68 / 83

68 Reference
Running Diagnostics
You can run diagnostics to test the hardware on your card. All
installed graphics modes can be viewed and tested.
To copy and run the diagnostics program in MS-DOS
1
Start your computer in MS-DOS mode.
2
Insert the ATI Installation CD-ROM into the CD-ROM
drive.
3
At the MS-DOS prompt, type the following:
XCOPY D:\UTILITY\M64DIAG.EXE c:\mach64\ /Y
(If D is not your CD-ROM drive, substitute the correct
drive letter.)
If you have not installed the ATI VIDEO PLAYER, you will
need to use the DOS Make Directory command (MD) to
create the mach64 directory.
This copies the M64DIAG.EXE program to your hard disk.
4
Type CD C:\MACH64.
5
Type M64DIAG.
6
Press Enter to run the program.
7
Select Diagnostics.
8
Type the number of times you would like to run the tests.
NOTE
You cannot
run the
diagnostics
program
inside a
Windows
MS-DOS
box.