ATI Technologies ALL-IN-WONDER PRO, Установка и настройка

Страница: 12 / 83

12 Installing the Hardware and Software
Preparing Your Computer
If you are using an operating system other than Windows
®
95 or
Windows
®
98, you may need to do the following before
installing your card:
If your current system configuration uses special drivers that are
not 640x480 VGA, you may encounter conflicts with the card.
We recommend that you first reconfigure your operating system
to use a VGA driver supplied with your operating system before
installing the card. For more information about changing your
operating system configuration, see your operating system
documentation.
Installing the Hardware
Now that you have prepared your computer, you are ready to
install your card. If you are not sure whether your
ALL-IN-WONDER PRO is PCI or AGP, compare the bottom
edge of your card with the following illustration:
Turn off the power to your system, and discharge your
body’s static electric charge by touching a grounded
surface — for example, the metal surface of the power
supply — before performing any hardware procedure.
The manufacturer assumes no liability for any damage,
caused directly or indirectly, by improper installation of
any components by unauthorized service personnel. If
you do not feel comfortable performing the installation,
consult a qualified computer technician.
Damage to system components, the accelerator card, and
injury to yourself may result if power is applied during
installation.
PCI
AGP