ATI Technologies 9800PRO - 128MB Dell - Radeon AGP 8x Vga DVI Tv-out DDR X2603, Инструкция по установке и настройке

Страница: 50 / 64

44 Reference
Basic troubleshooting tips
Problem Possible Solution
No video
•
Check that the card is seated properly in its expansion
slot. If the problem still exists, try a different expansion
slot.
• Ensure that the monitor cable is securely fastened to
the card.
•
Make sure that the monitor and computer are plugged
in and receiving power.
• If necessary, disable any built-in graphics capabilities on
your mother board. For more information, consult your
computer’s manual or manufacturer. (Note: some
manufacturers do not allow the built-in graphics to be
disabled or to become the secondary display.)
•
Make sure that you selected the appropriate monitor
when you installed your enhanced driver.
Poor TV
reception
•
If you use an indoor antenna, you will get the best
results with an amplified model. Place it as far away
from the PC monitor as possible, to avoid interference.
•
Splitting the cable or antenna input can reduce the
signal quality. For the best reception, connect the cable
or antenna directly to your card.
No sound
•
Make sure that your audio card’s line input is active
(see
Windows® Volume Control on page 24).
• Ensure that you have connected the audio cable from
your ALL-IN-WONDER card to the LINE IN connector
on your sound card.
•
Re-run the Sound Initialization Wizard:
1. Click the setup button.
2. Click the Display tab.
3. Click the Initialization Wizard button.
4. Click Next> twice, and check the Audio Input setting.