Manual, Compliant Deburring Blade
Document #9610-50-1030-04
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 •
18
4.5 Removing the Customer Supplied Blade Holder in the Manual Collet
The customer supplied blade holder can be adjusted and locked at various heights in the compliance device.
1.
Turn off and de‑energize all energized circuits (e.g. electrical, air, water, etc.).
2. Securely grasp the blade holder.
3. Pull the collet toward the compliance device.
4.
Pull the blade holder out of the compliance device.
Figure 4.4—Installing the Customer Supplied Blade Holder
Blade Holder
Collet
5.
Release the collet.
6. Check that the blade holder is securely locked in place.
7.
Safely resume normal operation.
