Manual, F/T Sensor, Ethernet Axia
Document #9610-05-Ethernet Axia-09
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
12
1.2 General Safety Guidelines
The customer should verify that the sensor is rated for the maximum load and torque expected during
operation. Because static forces are less than the dynamic forces from the acceleration or declaration of the
robot, be aware of the dynamic loads caused by the robot.
1.3 Safety Precautions
CAUTION:
Modifying or disassembling the sensor could cause damage and
void the warranty.
CAUTION:
Probing openings in the sensor causes damage to the instrumentation.
Avoid prying into the openings of the sensor.
CAUTION:
Do not overload the sensor. Exceeding the single-axis overload values of
the sensor causes irreparable damage.
CAUTION:
Do not contact the IP64 seal. Contacting the seal can cause the sensor
to malfunction.
CAUTION:
The sensor should be protected from impact and shock loads that exceed
rated ranges during transport as the impacts can damage the sensor’s performance.
Refer to
for more information about rated ranges.
