background image

14

15

|     ATHLONOPTICS.COM

ATHLONOPTICS.COM     |

4. TROUBLESHOOTING TIPS - Inaccuracy Issues

Check  scope  mounting  and  make  sure  there  is 

no movement when pulling the scope by hands. 

Tighten the mounts if there is any movement ob

-

served. 

Use a bench rest or sandbag to support the barrel 

and  stock  when  making  windage  and  elevation 

adjustments. This will help eliminate movement.

It is recommended using the same type of ammu

-

nition with same weight.

Check your rifle stock, as a loose stock changes 

the point of impact.

Make sure your rifle chamber and barrel are clean

Make sure rifling of the barrel is not damaged and 

no excessive grease inside the barrel

For any technical related questions, please con

-

tact Athlon Optics at 

[email protected] 

 

or call toll free 

1-855-913-5678

a)

b)

c)

d)

e)

f)

g)

THE ATHLON GOLD MEDEL LIFETIME WARRANTY*

Your Athlon product is not only warranted to be free 

of defects in materials and workmanship for the life

-

time of the product. Athlon will also repair or replace, 

at no charge to you, your product if you should dam

-

age  it  through  normal  use.  No  receipt  is  needed,  no 

registration  is  required.  This  is  a  commitment  that 

Athlon Optics will be the best product you can buy for 

your money.

*This warranty does not cover damages caused by 

deliberate damage, misuse, theft or maintenance pro-

vided by someone other than the Athlon Authorized 

Service Department.

Содержание TSP1










Отзывы: