12
13
| ATHLONOPTICS.COM
ATHLONOPTICS.COM |
A) ILLUMINATION SETTINGS
The illumination switch is set on the left side of the
scope chassis. Athlon offers variable 1-10 brightness
settings and two colors settings (red and green) for
the reticle. Press UP button to turn the unit ON. Press
and hold the UP button for 3 seconds to turn it OFF.
Use the UP button to make the reticle brighter and
the DOWN button to make it dimmer. The unit auto
-
matically turns OFF if no adjustments are made in 6
hours. Press UP and DOWN button at the same time to
switch between reticle colors. The unit automatically
sets the illumination at the last setting after a new
battery is installed.
Illumination Switch
Battery Chamber Cap
The illumination is powered by a AAA battery. Re
-
move the battery chamber cap by turning it count
-
er-clockwise and then set the battery with the posi
-
tive (+) side facing in. Reinstall the cap by turning it
clockwise, DO NOT OVER TIGHTEN.
3. MAINTAINING YOUR PRISM SCOPE
Disassembling or cleaning the scope internal
-
ly will void the warranty. If the scope requires
repairs, please refer to the warranty section for
complete instructions.
The external optical surfaces should occasionally
be wiped clean. Use the lens cloth provided or an
optical quality lens paper to wipe out dust or dirt
on the external lens surface. If large sand parti
-
cles or heavy dirt contamination is observed, re
-
move using soft brush or by blowing them away.
Apply lens cleaning liquid before wiping off. Al
-
ways keep the protective lens covers in place
when the scope is not in use to avoid dust collect
-
ing on the surface of the lenses. Store the unit in
a low-humidity environment.
a)
b)
