Atheros ARS263-SB Скачать руководство пользователя | Manualshive

Страница: 50 / 52

background image

Atheros Communications, Incorporated

1700 Technology Drive, San Jose, CA 95110

t: 408/773-5200
f: 408/773-9940

www.atheros.com

Industry Canada statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout
brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.

IMPORTANT NOTE:

Radiation Exposure Statement:

The product comply with the US/Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this manual. The
further RF exposure reduction can be achieved if the product can be kept as far as possible from
the user body or set the device to lower output power if such function is available.

NOTE IMPORTANTE: (Pour l'utilisation des appareils portables)
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-
Unis et le Canada établies pour un environnement non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux
expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du
corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une
telle fonction est disponible.

This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 0.6 cm is maintained between the antenna and users,
and

2) The transmitter module may not be co-located with any other transmitter or antenna,

For all products market in Canada, OEM has to limit the operation channels in CH1 to CH11 for
2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the
end-user regarding to Regulatory Domain change.

«
...
48
49
50
51
52
»

Содержание ARS263-SB





















































Отзывы:

Нет отзывов

Похожие инструкции для ARS263-SB

VR4 S-MF Series

Бренд: Vanderbilt Страницы: 24

Бренд: Farpointe Data Страницы: 2

CONEKT PCR-620L-OSDP

Бренд: Farpointe Data Страницы: 2

Бренд: Dormakaba Страницы: 27

Бренд: Bosch Страницы: 40

LECTUS enroll 5000 MD

Бренд: Bosch Страницы: 2

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 24

Бренд: Bosch Страницы: 44

Бренд: Bosch Страницы: 88

Бренд: Bosch Страницы: 32

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 6

Бренд: Renkforce Страницы: 4

Бренд: Renkforce Страницы: 4

Бренд: Unigraf Страницы: 23

Бренд: Acces I/O products Страницы: 19

Бренд: Transition Networks Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды