Atheros ARS263-SB Скачать руководство пользователя | Manualshive

Страница: 48 / 52

background image

Atheros Communications, Incorporated

1700 Technology Drive, San Jose, CA 95110

t: 408/773-5200
f: 408/773-9940

www.atheros.com

Note: The country code selection is for non-US model only and is not available to all US model.
Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.  However, there is no guarantee that
interference will not occur in a particular installation.  If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:

The product comply with the US/Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this manual. The
further RF exposure reduction can be achieved if the product can be kept as far as possible from
the user body or set the device to lower output power if such function is available.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

This device is intended only for OEM integrators under the following conditions:

«
...
46
47
48
49
50
...
»

Содержание ARS263-SB





















































Отзывы:

Нет отзывов

Похожие инструкции для ARS263-SB

Бренд: JARLTECH Страницы: 31

Sentinel-Prox DC-1023

Бренд: AWID Страницы: 12

Cyber 2S1P PCIe

Бренд: SIIG Страницы: 12

Бренд: TEDIA Страницы: 24

Бренд: Jaton Страницы: 41

Бренд: Hama Страницы: 26

Live! PLATINUM 5.1

Бренд: Creative Страницы: 197

FX-DS540-MPCI4W

Бренд: Contec Страницы: 5

Бренд: GoMax Electronics Страницы: 8

TWN4 Palon Compact LEGIC

Бренд: Elatec Страницы: 15

Бренд: Octagon Страницы: 25

Бренд: Abocom Страницы: 1

Бренд: Diablotek Страницы: 1

Бренд: APLIC Страницы: 16

WBT-1200 Series

Бренд: WBE Страницы: 7

Бренд: Sun Microsystems Страницы: 82

Бренд: Datapath Страницы: 2

VisionLC Series

Бренд: Datapath Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды