ATH-Heinl 7226, Руководство по эксплуатации

Страница: 82 / 354

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 36 -
8.1 Installation and Handover Log
Site: Device / system:
Company: Manufacturer:
Street: Type / model:
Town: Serial no.:
Country: Year of
construction:
Responsible retailer:
The above product has been assembled, checked for function and safety and put into operation. Installation was
carried out by:
the operator the technical expert
The operator confirms that the product type has been set up correctly, that he/she has read and understood all
information contained in these
operating instructions and the log, and that he/she keeps this documentation accessible to the instructed operator at
all times.
The operator confirms that after installation and commissioning by a person trained by the
manufacturer or an authorised dealer (expert), instruction in the function, handling, safety-relevant specifications,
maintenance and care of the machine has taken place, documents, information and specifications of the machine
have been provided and the product is working properly.
IMPORTANT NOTES:
IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS EXCLUDED:
The warranty is only valid in conjunction with compliance and evidence of proper assembly, handover, and if
necessary training, as well as yearly maintenance carried out by an expert authorised by the manufacturer. The
interval between services must not exceed 12 months. In case of non-standard use or multi-shift or seasonal use, a
bi-annual inspection and maintenance must be arranged.
Warranty claims are only recognised if all points in the log and operating instructions have been met, the claim is
asserted immediately after detection and this log is sent to the manufacturer along with the maintenance
and service logs
.
Further specific information about the warranty, such as scope, requirements and specifications, are described in the
operating instructions and must be observed.
Damages and complaints caused by improper handling; failure to maintain and service; use of unsuitable or
unspecified assembly, operating, maintenance or service products; mechanical damage; intervening in the unit
without consultation or by an unauthorised expert are excluded from the warranty. For systems that have not been
installed by an authorised expert, the warranty is limited by agreement of the manufacturer to the provision of the
necessary spare parts.
Expert name and company stamp
if necessary, number and name of retailer
Date and expert signature
Operator name and company stamp
Date and operator signature