Atest Gaz Teta MOD Control 1, Руководство пользователя

Страница: 28 / 36

www.atestgaz.pl
The module should be mounted in the orientation as shown in figure 1.
Avoid places with high humidity.
If multi-wired strands (commonly referred to as "cables") are used for connecting, the ends of these strands
shall be terminated with terminal sleeves.
It is unacceptable to combine in one connector two wires which are not pinched in one cable
lug.
Do not place the cable reserve in the device. Bare wires or wires surplus may create a danger
of electric shock or equipment damage.
Do not leave disconnected cables inside the device.
Incorrect cable routing can lead to reducing the device's immunity from electromagnetic
interference.
Unused screw contacts must be tightened.
Figure 12: Example connection of cables to the device
s. 28|31
User's Manual: POD-051-ENG R02
Incorrect Correct