Atest Gaz Sigma SmArt, Руководство пользователя

Страница: 78 / 84

www.atestgaz.pl
Register map of SmArtGas 3 and ProGas Gas
Detector
All the data are available in the 'holding registers' (function code 3).
Register Name Description Type
40001 State_A Detector status – the definition of bits below flags
40002 - Inessential data, can take any value -
40003 N Gas concentration
A value of 0 corresponds to the 0 concentration, the value of
1000 corresponds to a concentration of the range of the
detector
16 bit integer
40004 - Inessential data, can take any value -
40005 Sample_Cnt Sample counter. The value is increased by 1 after each
measurement. It takes values from 0 to 255 Total number 16 bit
State_A - detector status. The meaning of the bits is described in the table below.
Bit Name Description
0 Collective_W1 Gas concentration is above first warning threshold
1 Collective_W2 Crossing the second warning threshold
2 Collective_AL Crossing the alarm threshold
3 Collective_CrFail Collective information about a critical failure
4 Collective_NonCrFail Collective information about a non-critical failure
5 Gas_Hi_Range Operation on a coarse measuring channel (for type 2 and 3).
6 Gas_HiHi_Range Gas overload
7 Sensor_Lock Lock of the sensor (the last measurement was locked)
8 Calibration Calibration mode
9 Test Test mode
10 Warm_Up Sensor warm-up
11..15 - Inessential data, can take any value
Atest-Gaz A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: contact@atestgaz.pl
p. 1/1 Appendix: PU-Z-056-ENG R01
•