Atest Gaz PW-072-A, Руководство пользователя

Страница: 21 / 60

www.atestgaz.pl
System status:
Information about system status is displayed interchangeably with information about date and
time (or clock not being set) – this allows to verify the setting of this parameters in control unit.
This section shows a text collective description of the system. Possible messages include:
Message Description
OPERATIONAL This message is displayed, when all system components covered by self-diagnostics operate
correctly.
FAULT At least one component covered by self-diagnostics is faulty (Control Unit or a detector).
EXTER.ALARM Dual Input (DI) has been set up as EXTER. ALARM and has been triggered.
EXTER.FAULT Dual Input (DI) has been set up as EXTER. FAULT and has been triggered.
Table 6: Collective text system description
Beacon status:
This section presents indicator activations:
Icon Description
Active visual indicator. When the indicator is disabled, this field is empty.
Active acoustic indicator. When the indicator is disabled, this field is empty.
Table 7: Indicator activation status
Detector status:
This section presents the status of individual detectors. Each detector is represented through the
panel as shown in figure 19:
p. 21|38
User's Manual: POD-026-ENG R17
Figure 18: Detector panel with 10 to 20 detectors
Detector status
Concentration above alarm threshold
Concentration above warning 2 threshold level
Concentration above warning 1 threshold level
Concentration below warning 1 threshold level