ATEN VM0202H, Руководство пользователя

Страница: 11 / 29

- 11 -
Installation
Installation of the VM0202H is simply a matter of plugging in the
appropriate cables. To install the switch, refer to the installation diagram
below as you perform the following steps:
1. (Optional) If you are using the serial control function, use an
appropriate RS-232 serial cable to connect the computer or serial
controller to the VM0202H’s female
RS-232
port.
2. Use a grounding wire to ground the unit by connecting one end of the
wire to the grounding terminal and the other end of the wire to a
suitably grounded object.
Note:
Note: Do not omit this step. Proper grounding helps to prevent
damage to the unit from surges and static electricity.
3. Use HDMI cables to connect the video display devices to the
HDMI
output ports
on the rear of the VM0202H.
4. Use HDMI cables to connect the video source devices to the
HDMI
input ports
.
5. Connect the IR Receiver to the
External IR Receiver
Input Port.
6. Plug the provided power adapter into an appropriate AC power
source; plug the power adapter cable into the Power Jack on the
VM0202H.
7. You may now power on the display and source devices.
1. Make sure that the power to any device that you connect
to the installation has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.