ATEN VM0202H, Руководство пользователя

Страница: 27 / 29

- 27 -

The device has been exposed to rain or water.

The device has been dropped, or the cabinet has been damaged.

The device exhibits a distinct change in performance, indicating a
need for service.

The device does not operate normally when the operating
instructions are followed.

Only adjust those controls that are covered in the operating
instructions. Improper adjustment of other controls may result in
damage that will require extensive work by a qualified technician to
repair.
Rack Mounting

Before working on the rack, make sure that the stabilizers are
secured to the rack, extended to the floor, and that the full weight of
the rack rests on the floor. Install front and side stabilizers on a single
rack or front stabilizers for joined multiple racks before working on the
rack.

Always load the rack from the bottom up, and load the heaviest item
in the rack first.

Make sure that the rack is level and stable before extending a device
from the rack.

Use caution when pressing the device rail release latches and sliding
a device into or out of a rack; the slide rails can pinch your fingers.

After a device is inserted into the rack, carefully extend the rail into a
locking position, and then slide the device into the rack.

Do not overload the AC supply branch circuit that provides power to
the rack. The total rack load should not exceed 80 percent of the
branch circuit rating.

Make sure that all equipment used on the rack – including power
strips and other electrical connectors – is properly grounded.

Ensure that proper airflow is provided to devices in the rack.

Ensure that the operating ambient temperature of the rack
environment does not exceed the maximum ambient temperature
specified for the equipment by the manufacturer.

Do not step on or stand on any device when servicing other devices
in a rack.