7
Chapter 2
Hardware Setup
Installation
Setting up the VE803 is a matter of plugging in all the cables. Refer to the
installation diagram on the next page (the numbers in the diagram correspond
to the numbered steps) and do the following:
1. Connect one end of an HDMI cable to the HDMI output port of your source
device, and connect the other end to the
HDMI Input
port on the VE803T.
2. Using the USB cable provided with this package, connect one end (Type B
connector) to the
USB
port on the VE803T, and the other end (Type A
connector) to the source device.
Note:
The VE803T takes its power from this
USB
port. If the power
supply is not enough to power on the VE803T, the unit can be
plugged directly to a power outlet using a second power adapter (not
supplied in this package).
3. Use an HDMI cable to connect your HDMI display to the
HDMI Output
port on the VE803R.
4. Using a USB cable, connect one end (Type A connector) to the
USB
port
on the VE803R, and the other end to your HDMI display (or another
device, such as a touchscreen).
Note:
The USB cable for the VE803R is not supplied in this package.
1. Important safety information regarding the placement of this
device is provided on page 10. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.