Chapter 1. Introduction
4
Components
VE803T Right View
VE803T Left View
No.
Component
Description
1
Power LED
Lights (green) to indicate that the unit is receiving power.
2
Power Jack
The power adapter cable plugs connects here.
3
HDMI Input port
Connect the HDMI source device to this port.
4
USB Type B port
Connect the source controller device to this port.
5
HDMI port
Use a Cat 5e cable to connect the VE803T to the VE803R
through this port. This channel is equipped with TMDS and
sends the HDMI signal between the two units.
6
USB port
Use a Cat 5e cable to connect the VE803T to the VE803R
through this port. This channel is equipped with DDC and
sends the USB signal between the two units.
7
EDID Selection
Use this switch to set the EDID mode (
Bypass
or
Default
) .
2
3
4
1
5
7
6
1