VE2812T User Manual
13
Type the corresponding command to execute a task. For example, to enable
automatic switching, type
swmode next
and then press
[Enter]
.
Task
Command
Control
Input
Port
Enable automatic input switching
swmode next
N/A
N/A
Disable automatic input switching
swmode off
N/A
N/A
Set the unit to the HDMI mode
sw
i
01
Set the unit to the VGA mode
sw
i
02
View the current input mode settings
read
N/A
N/A
Note:
Press
[Enter]
to execute a command.
The current input mode setting is also indicated by the Auto Switch, HDMI, and
VGA LEDs.
To switch VE2812T RS-232 mode, press the Input Switch pushbutton for 5
seconds. For RS-232 command mode, the Auto Switch Mode LED, HDMI Mode
LED, and VGA Mode LED light orange and blink 3 times. For RS-232 bypass
mode, the Auto Switch Mode LED, HDMI Mode LED, and VGA Mode LED light
orange and blink 1 time. The RS-232 status is kept even VE2812T is powered on
and off. For detailed LEDs behavior, see
