VE2812T User Manual
9
RS-232 Channel Transmission
You can manage the VE2812T via RS-232 serial devices, such as computers
or bar code scanners. The RS-232 signal transmission flow can be illustrated as
follows:
From a source device, the RS-232 signal is transmitted (Tx) to the VE2812T
receiving (Rx) unit; the a compatible ATEN Video Receiver transmits (Tx)
signals to the display device (Rx).
You can set the VE2812T to either bypass serial data or to receive RS-232
commands. By default, the VE2812T is set to bypass serial data. To set the unit
to receive RS-232 commands, press the Input Switch pushbutton for 5 seconds.
For details on RS-232 commands, see
PIN
CONFIGURATION
(Captive screw
connectors)
Tx
Rx
Gnd
Tx
Rx
Gnd
Tx
Rx
Gnd
Tx
Rx
Gnd
Serial
Device
Cat 5e / 6 / 6a
