ATEN VE2812R, Руководство пользователя, Страница: 20 / 30

Chapter 3. Operation
12
Command to control VE2812T
You can change the input mode of VE2812T using RS-232 commands. Refer
to the table below for a list of available tasks and the corresponding commands.
For example, to enable automatic switching, type swmode next and then press
[Enter] .
You can simply switch RS-232 mode between Command / Bypass by clicking
the RS-232 Serial Communication Switch listed below.
Note: By default, the VE2812R is set to Bypass serial data.
Task
Command
Control Input Port
Enable automatic input switching swmode next N/A N/A
Disable automatic input switching swmode off N/A N/A
Set the unit to the HDMI mode sw i 01
Set the unit to the VGA mode sw i 02
View the current input mode settings read N/A N/A
Note:

Press [Enter] to execute a command.
6
RS-232 Serial Communication Switch