ATEN VE157, Руководство пользователя

Страница: 17 / 49

Hardware Setup
9
Note: The device can be damaged if incorrectly paired wires are inserted into
the terminal block. A voltmeter is one of the tools used to measure an
exposed wire’s polarity (i.e., +9V or GND).
4. Connect and snap the Terminal Block
Connector into the 2-pin Terminal Block
located on either the Transmitter or
Receiver unit’s rear panel.
5. Connect the other end of the power adapter
to a power socket.
Note: If you wish to use another external
power supply, ensure that it stays
within a voltage range of +9V~12V.