ATEN VE157, Руководство пользователя

Страница: 15 / 49

7
Chapter 2
Hardware Setup
Overview
For convenience and flexibility, the VE157 / VE607 / VE807 can be mounted
on the wall, ceiling, floor or any surface of your preference.
The dimensions of the VE157 / VE607 / VE807 are made to fit an area equal
to a standard wall plate.
For a neat finish, use the Wall Plate Covers that are included in the package
contents. For more information on the dimensions of the VE157 / VE607 /
VE807 fitted to a wall plate, see page 22.
Note: This chapter uses theVE807 panels for illustrating the installation steps.
Before Mounting
In order to mount the VE157 / VE607 / VE807, you first need to complete the
following instructions:
Prepare two installation sites (for the Transmitter and Receiver units) with the
proper dimensions (see image below) to accommodate the Wall Plate.
Make sure proper cabling (unit-to-unit via Cat 5e; unit-to-power) can be
supplied to both sites.
Wall Plate Dimensions
The installation site or wall plate should have a minimum depth measurement
of 4.5 cm (1.77 in.). For more information, see page 22.
1. Important safety information regarding the placement of this
device is provided on page 15. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.