ATEN VE156, Руководство пользователя

Страница: 15 / 37

7
Chapter 2
Hardware Setup
Overview
For convenience and flexibility, the VE156 / VE606 / VE806 can be mounted
on the wall, ceiling, floor or any surface of your preference.
The dimensions of the VE156 / VE606 / VE806 are made to fit both a standard
one-gang wall box and a single-gang mud ring, which can be purchased at a
hardware store.
For a neat finish, use a wall plate as a cover. For more information on the
dimensions of the VE156 / VE606 / VE806 fitted to a wall plate, see page 22.
Note: This chapter uses the VE156 panels for illustrating the installation steps.
Before Mounting
In order to mount the VE156 / VE606 / VE806, you first need to purchase: a
standard single-gang Decora Face Plate, and either one of the following:
 Single-gang Mud Ring
 One-gang Wall Box
Note: The VE156 / VE606 / VE806 package does not include a mounting kit.
Prepare two installation sites (for the Transmitter and Receiver units) with the
proper dimensions (see image below) to accommodate the Mud Ring or Wall
Box.
Make sure proper cabling (unit-to-unit via Cat 5e; unit-to-power) can be
supplied to both sites.
Wall Box Dimensions
The installation site or wall box should have a minimum depth measurement of
5 cm (1.97 in.). For more information, see page 22.
1. Important safety information regarding the placement of this
device is provided on page 15. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.