ATEN VE156, Руководство пользователя

Страница: 13 / 37

Introduction
5
Rear View (Transmitter / Receiver)
No. Component Description
1 Line IN/OUT (VE156)
TMDS Port (VE606 / VE806) The Cat 5e cable that connects the Transmitter
and Receiver units plugs in here. The Cat 5e
connection between these ports transmits video
and audio signals.
For VE156:

Transmitter (Line OUT)

Receiver (Line IN)
2 Power (Terminal block) The power adapter wires (+9V and GND) plug in
here.
See
How to Supply Power , page 8 for the steps
on how to connect the terminal block to a power
source.
3 Power Port (VE156)
DDC Port (VE606 / VE806) Use a Cat 5e cable to connect the Transmitter
and Receiver units through this port.
The second Cat 5e cable connection transmits the
power signal to either the Transmitter or Receiver
when only one of the units is supplied power via
the Terminal Block.
For VE606 / VE806, in addition to transmitting the
power signal, the second Cat 5e cable is used for
real EDID Bypass and HDCP key authentication.
4 Grounding Terminal The grounding wire is attached here.
Note: The grounding wire is not included in this
package.
1
2
3
4