ATEN VanCryst VE8900, Руководство пользователя

Страница: 87 / 122

Chapter 6. CLI Commands
75
Example

To apply Layout 1 to a video wall with the ID of 8c8f12e62d3c87ef , and
assign the source connected to VE8950T (device ID: 2 ) to the video wall,
where one of the display is connected to a VE8900R (IP address:
10.0.66.73 ), type the following:
vw + f8c8f12e62d lLayout 1 + o10.0.66.73 + i2 + on
o<port> Indicates the device ID, MAC ID, or the IP address of the output
(VE8900 / VE8950 / VE8952 receiver) device on which you wish
display the specified source (i<port>).
Note: If the specified layout contains a 4 displays, two of which are
merged, you will need 3 pairs of o<port> + i<port> to indicate the
source to be displayed on each display. Omit the o<port> element
when specified layout does not contained any merged screens.
on Enables the video wall setting configuration and display to the
specified VE8900 / VE8950 / VE8952 receiver.
off Disables the video wall setting configuration and display to the
specified VE8900 / VE8950 / VE8952 receiver.
Note: Please do not specify any i<port> element when using the off
command.
\r\n Ends the command.
Control Description