ATEN UN-201, Руководство пользователя

Страница: 5 / 16

Driver Installation
Before you begin the USB 2.0 Data-Link Cable installation,
please note the following:
M
Do not plug the USB 2.0 Data-Link Cable into the computer
before installing the driver. The driver must be installed first.
M
Before you can install the USB 2.0 Data-Link Cable driver,
Client for Microsoft Networks must be installed on your
system. To check if it has already been installed, open
Windows Explorer > Control Panel > Network.
If Client for Microsoft Networks is installed you will see an
entry for it in the Installed Network Components panel. If
there is no entry, you will need to install it:
1. Click on Add; Select Client; Click on Add
2. In the left panel select Microsoft; in the right panel select
Client for Microsoft Networks; Click on OK
3. Follow the on-screen instructions to complete the installation.
Two peer networking drivers are provided with the UN-201 USB
2.0 Data-Link Cable:
M
SuperLink

The SuperLink driver is used for file transfers between two
computers (PC to PC).
M
Virtual Network

The Virtual Network driver allows sharing of system
resources (printers, scanners, drives, folders, files, etc.)
among a Data-Link peer workgroup, as well as the ability to
bridge to an Ethernet LAN. If you bridge to an Ethernet LAN,
the peer workgroup has access to all the resources on the
LAN - including Internet sharing.
Note: Both drivers cannot be installed at the same time.
When you install one of the drivers, if the installation
program finds the other one is present, it will uninstall
it before installing the one you want.
- 3 -
2003-04-15