ATEN UN-201, Руководство пользователя

Страница: 12 / 16

To set up the Bridge computer:
1. Power up the computer you have chosen to serve as the
Bridge, and log onto the Ethernet LAN.
2. Install the Virtual Network driver as described under Basic
Peer Networking (p. 6, above), except that if asked whether
you want to install the Network Bridge, Click on Yes.
Note: Depending on your Windows version, you may not be
asked this, in which case the bridging takes place
automatically.
3. After the driver installation is complete, connect the Bridge
computer to one of the computers on the Data-Link network
with a USB 2.0 Data-Link Cable.
Setting up the Data-Link Network for Internet Sharing:
In order for the computers on the Data-Link network to access the
Internet, the Bridge computer must be set up for Internet Shar-
ing. This procedure is slightly different for each version of Windows:
M
Win 98:
1. Open the Control Panel: My Computer > Control Panel
2. Open Add/Remove Programs; select the Windows Setup tab
3. Scroll down and check Internet Tools; Click Details
4. Check Internet Connection Sharing; Click OK
5. When you return to the Windows Setup page Click OK
If the Internet Wizard program appears, make these responses:
1. For Select Network Adapter for the Internet, select the
computer’s Ethernet Adapter card (for example: XYZ12345
PCI Fast Ethernet NIC).
2. For Select Network Adapter for Local , select the Virtual
Network Adapter.
3. There is no need to make a client configuration disk.
- 10 -
2003-04-15