ATEN KA8270, Руководство пользователя

Страница: 70 / 116

KVM over IP Console Station User Manual
58
5. In the Timeout field, set the time in seconds that the KVM over IP console
station waits for a RADIUS server reply before it times out.
6. In the Retries field, set the number of allowed RADIUS retries.
7. In the Shared Secret field, key in the character string that you want to use
for authentication between the KVM over IP console station and the
RADIUS Server. A minimum of 6 characters is required.
8. On the RADIUS server, Users can be authenticated with any of the
following methods:
 Set the entry for the user as su/xxxx
Where xxxx represents the Username given to the user when the
account was created on the KVM over IP console station.

Use the same Username on both the RADIUS server and the KVM
over IP console station.
 Use the same Username name on both the RADIUS server and the
KVM over IP console station.
In each case, the user’s access rights are the ones assigned that were
assigned when the User of Group was created on the KVM over IP console
station (see
Adding Devices on page 36).
AD / LDAP Settings
To allow authentication and authorization for the KVM over IP console station
via AD / LDAP, refer to the information in the table, below:
Item Action
Enable Check the checkbox to enable AD / LDAP authentication and
authorization.
Type Click the drop down menu to select between AD / LDAP.
Server IP Select Preferred or Alternate LDAP Server and fill in the IP address
and port number for the LDAP or LDAPS server.
You can use the IPv4 address, the IPv6 address or the domain
name in the
LDAP Server field.
For LDAP, the default port number is 389.
Timeout This is the time in seconds that the KVM over IP console station
waits for an AD or LDAP server reply before it times out.