manualshive.com logo in svg

ATEN KA8270, Руководство пользователя, Страница: 107 / 116

Поделиться
Скачать
ATEN KA8270 Скачать руководство пользователя страница 107

95

Appendix

Safety Instructions

General

This product is for indoor use only.

Read all of these instructions. Save them for future reference.

Follow all warnings and instructions marked on the device.

Do not place the device on any unstable surface (cart, stand, table, etc.). If 
the device falls, serious damage will result.

Do not use the device near water.

Do not place the device near, or over, radiators or heat registers.

The device cabinet is provided with slots and openings to allow for 
adequate ventilation. To ensure reliable operation, and to protect against 
overheating, these openings must never be blocked or covered.

The device should never be placed on a soft surface (bed, sofa, rug, etc.) as 
this will block its ventilation openings. Likewise, the device should not be 
placed in a built in enclosure unless adequate ventilation has been 
provided.

Never spill liquid of any kind on the device.

Avoid circuit overloads. Before connecting equipment to a circuit, know 
the power supply’s limit and never exceed it. Always review the electrical 
specifications of a circuit to ensure that you are not creating a dangerous 
condition or that one doesn’t already exist. Circuit overloads can cause a 
fire and destroy equipment. 

Unplug the device from the wall outlet before cleaning. Do not use liquid 
or aerosol cleaners. Use a damp cloth for cleaning.

The device should be operated from the type of power source indicated on 
the marking label. If you are not sure of the type of power available, 
consult your dealer or local power company.

To prevent damage to your installation it is important that all devices are 
properly grounded.

Do not allow anything to rest on the power cord or cables. Route the 
power cord and cables so that they cannot be stepped on or tripped over.

Position system cables and power cables carefully; Be sure that nothing 
rests on any cables.

Содержание KA8270





















































































































Отзывы:

Нет отзывов