Chapter 3. Operation
19
Switching the Input
To change the input source of an output display using the remote control, do
the following:
1. Press the
Output
port button (
1-2
) that you want to change.
2. Within 2 seconds press the
Input
port button (
1-2
) you want the output
port to display.
Note:
For the change to occur the input number must be pressed within 2
seconds of pressing the output number.
3. Repeat steps 1-2 to change additional ports.
Turning the Outputs on/off
To turn an output on/off using the remote control, do the following:
1. Press the
Output
port button (
1-2
) that you want to turn off.
2. Within 2 seconds press the
ON
or
OFF
button on the remote control.
Note:
If the
ON
or
OFF
button is pressed
after
2 seconds of pressing the
output port number, all the displays are powered on or off instead of
just the intended output port.
3. Repeat steps 1-2 to turn the output back on/off.
Turning All Outputs on/off
To have all output displays turned on or off, regardless of the current power
statuses, press the
ON
or
OFF
button on the remote control.
