ATEN CS1762a, Руководство пользователя

Страница: 15 / 54

Chapter 1. Introduction
7
No. Component Description
1 Port
Selection
Pushbuttons For manual port selection (see see Manual Switching ,
page 15, also):
Š
Press a port selection pushbutton for less than two seconds to
bring the KVM, USB hub, and audio focus to the computer
attached to its corresponding port.
Š
Press a port selection pushbutton twice to bring the audio focus to
the computer attached to its corresponding port.
Š
Press a port selection pushbutton for longer than two seconds to
bring only the KVM focus to the computer attached to its corre-
sponding port.
Š
Press switches 1 and 2 simultaneously for 2 seconds to start Auto
Scan Mode, see
Auto Scanning , page 21 for details.
2 Port LEDs The Port LEDs are built into the Port Selection Switches. The
upper ones are the KVM Port LEDs; the lower ones are the
USB LEDs:
KVM
Š
Lights DIM ORANGE to indicate that the computer attached to the
corresponding port is up and running (On Line).
Š
Flashes to indicate that Firmware Upgrade mode is in effect.
Š
Changes to BRIGHT ORANGE to indicate that the computer
attached to its corresponding port is the one that has the KVM
focus (Selected).
Š
Flashes to indicate that the computer attached to its corresponding
port is being accessed under Auto Scan mode.
USB
Š
Lights GREEN to indicate that the computer attached to its corre-
sponding port is the one that has access to the USB peripherals.
3 USB
Console
Ports (CS1762
A
only) Your USB keyboard and USB mouse plug in
here.
Note: The CS1764
A
’s USB console ports are located on the
unit’s rear panel.
4 Audio Ports (CS1764
A
only) The cables from your main speakers and
main microphone plug in here. The speakers and
microphone plugged in here have priority over those in the
rear panel.
Note: The CS1762
A
’s audio ports are located on the unit’s
rear panel.
5 USB 2.0
Hub (CS1764
A
only) USB 2.0 peripherals (printers, scanners,
etc.) can plug into this port (this may require an extra power
adapter).
Note: The CS1762
A
’s USB 2.0 hub port is located on the
unit’s rear panel.