background image

 Chapter 4. Hotkey Operation

21

Auto Scanning

The CS1762

A

 / CS1764

A

’s Auto Scan feature automatically cycles the KVM 

focus through the computer ports at regular intervals. This allows you to 
monitor the computer activity without having to take the trouble of switching 
from port to port manually. Although the video focus switches from port to 
port, the keyboard, mouse, and USB focus doesn’t switch. They stay at the port 
they were on when Auto Scanning started. See the table below for details. .

When you use the port switching hotkey or HSM, the mouse cursor must be in 
the current computer display.

While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are 
suspended – only Auto Scan Mode compliant keystrokes and mouse clicks can 
be input. You must exit Auto Scan Mode (press the 

Esc

 key or the 

Spacebar

in order to regain normal control of the console. 

Hotkey

Action

[Scroll Lock] [Scroll 
Lock] [A] [Enter]

Invokes Auto Scan. The KVM focus cycles from port to port 
at 

5 second intervals

. Five second intervals is the Default 

setting.

[Scroll Lock] [Scroll 
Lock] [A] [n] [Enter]

The KVM focus cycles from port to port at n second intervals.

Note: 

The n stands for the number of seconds that the 

CS1762

A

 / CS1764

A

 should dwell on a port before moving on 

to the next. Replace the n with a number between 1 and 99 
when entering this hotkey combination

Содержание CS1762a























































Отзывы: